Gradall Forklift Parts

Gradall Forklift Part - The Gradall excavator was the brainchild of two brothers Koop and ray Ferwerda. The excavator was established In the 1940's during WWII, when there was a scarcity of labourers. Partners in a Cleveland, Antioch construction business known as Ferwerda-Werba-Ferwerda, the brothers faced a huge dilemma when lots of men left the workforce and signed up in the military, depleting existing workers for the delicate grading and finishing work on highway projects. The Ferwerda brothers decided to make a machine that will save their company by making the slope grading work more efficient, less manual and easier.

Their very first design prototype was a device with two beams set on a rotating platform that was attached atop a used truck. A telescopic cylinder moved the beams back and forth that enabled the fixed blade at the end of the beams to pull or push dirt. Soon enhancing the initial design, the brothers built a triangular boom in order to add more strength. Additionally, they added a tilt cylinder which let the boom rotate 45 degrees in both directions. A cylinder was positioned at the rear of the boom, powering a long push rod to enable the equipment to be outfitted with either a bucket or a blade attachment.

Gradall introduced in the year 1992, with the introduction of the new XL Series hydraulics, the most innovative adjustment in their machinery since their invention. This new system of top-of-the-line hydraulics enabled the Gradall excavator to deliver high productivity and comparable power to the more traditional excavators. The XL Series ended the initial Gradall equipment power drawn from gear pumps and low pressure hydraulics. These conventional systems efficiently handled grading and finishing work but had a difficult time competing for high productivity jobs.

The new XL Series Gradall excavators proved a remarkable increase in their lifting and digging ability. These models were made along with a piston pump, high-pressure hydraulics system that showed great improvements in boom and bucket breakout forces. The XL Series hydraulics system was even developed together with a load-sensing capability. Traditional excavators utilize an operator in order to select a working-mode; where the Gradall system could automatically adjust the hydraulic power meant for the task at hand. This makes the operator's general work easier and also saves fuel at the same time.

As soon as the new XL Series hydraulics reached the market, Gradall was thrust into the extremely competitive industrial equipment market that are designed to deal with excavating, demolition, pavement removal as well as different industrial work. The introduction of the new telescoping boom helped to further enhance the excavator's marketability. The telescoping boom gives the excavator the ability to better position attachments and to work in low overhead areas.

Click to Download the pdf

Forklift Parts

Parts for Heavy Duty Scissor Lift

Parts for Heavy Duty Scissor Lift - Scissor lifts could help move a variety of objects, normally used in order to lift employees to heights for certain tasks. This is accomplished by raising and lowering the platform. The scissor lift is made up of the scissor legs, a work platform and the lower frame assembly. These pieces of machine are...

More

---

Parts for Counterbalance Forklifts

Parts for Counterbalance Forklifts - Counterbalance forklifts are actually popular pieces of equipment in the material handling industry. They are common equipment used in factories and warehouses all-around the globe. The leading lift truck producers such as Linde, Toyota and Mitsubishi all create counterbalance lift trucks. They are obtainable in a range of fuel alternatives like for instance electric, gas...

More

---

Concrete Hopper

Concrete Hoppers - This attachment is a self-dumping hopper that automatically sets off to dump as bumper release touches the side of a dumpster. Once dumping is finished, the hopper returns to an upright and locked position. This piece of equipment is even available together with a cable which enables operation from the seat of the lift truck to be...

More

---

Diesel Forklift Parts

Parts for Diesel Forklifts - A forklift is a helpful device if your own company requires the moving, unloading and loading of really heavy items such as in a manufacturing facility or a warehouse operation. To be able to safely move goods or transfer supply, a forklift is a vital item for one to have at their job location. Managers...

More

---

Attachments for Platform Scissor Lifts

Platform Scissor Lift Attachment - Scissor pallet trucks are built for transporting and raising separately stacked pallets by integrating a lifting device that permits the pallets on the truck to be elevated. This apparatus is a great tool for functioning in space constrained areas that will not allow a full-sized forklift. The scissor pallet vehicle is also awfully efficient in...

More

---

Attachment for Stand Up Forklift

Stand Up Forklift Attachments - The internal combustion engine powered forklifts are accordingly labeled to the fuel kind utilized. Type "G" forklifts are fueled by gasoline. These meet fires hazard least requirements and is the most common designation for lift trucks powered by gas. Forklifts labeled "G" are not used in unsafe sites for apparent reasons. Type "GS" forklifts are...

More

---

Parts for Electric Scissor Lifts

Electric Scissor Lift Part - Scissor hoists are lift tables that raise things and individuals and goods vertically. They are usually used in industrial, construction and commercial environments. A common use of scissor hoists is for lowering or lifting construction materials on a job location from one floor to the next. These equipment allow ergonomic transfer of items to be...

More

---

Forklift Drive Motor

Forklift Drive Motors - Motor Control Centers or otherwise called MCC's, are an assembly of one enclosed section or more, that have a common power bus principally consisting of motor control units. They have been used ever since the 1950's by the auto business, for the reason that they made use of a lot of electric motors. Today, they are...

More

---